AS & A Level Mathematics · Mechanics 1 · Chapter 4
Newton’s laws of motion
- Foundational Mechanics: Isaac Newton formulated the three core laws governing the relationship between the mass of an object, forces acting upon it, and the resulting acceleration.
- Newton’s Second Law F = ma: where there is a non-zero resultant force, a particle accelerates in that direction proportional to the net force and inversely proportional to its mass.
- Mass vs Weight: mass (m in kg) is constant everywhere; weight (W = mg in N) is the gravitational pull, taking g = 10 m s⁻² on Earth.
- Real-world systems: apply dynamic equations to linear horizontal motion, vertical free-fall with air resistance, inclined planes, lifts, connected vehicles, and pulleys.
🎯 Learning objectives
- Recall and apply Newton’s three laws of motion to linear motion of constant mass particles.
- Differentiate between mass m (scalar in kg) and gravitational weight W = mg (force in N with g = 10 m s⁻²).
- Identify all forces acting on a body (weight, normal reaction, tension, thrust, friction, air resistance).
- Formulate equations of motion along the line of acceleration using F = ma.
Book exercises: Exercise 4.1A and Exam-style questions 1, 9, 10, 11.
1. The three laws of motion & resultant force
- Newton’s First Law: A particle remains at rest or continues to move with constant velocity in a straight line unless acted upon by a non-zero resultant external force.
- When resultant force is zero (ΣF = 0), acceleration a = 0 m s⁻². The particle is in translational equilibrium.
- If a car cruises at steady speed on a level road, engine driving force exactly balances friction and air resistance.
- Newton’s Second Law: When a resultant force F acts on a particle of mass m, it produces an acceleration a in the direction of the force:
F = ma (F in Newtons, m in kg, a in m s⁻²)
- Newton’s Third Law: When body A exerts a force on body B, body B exerts an equal and opposite force on body A.
- Forces always occur in action-reaction pairs having identical magnitude and opposite directions.
- They act on different bodies, so they never cancel each other out on a single free body diagram.
2. Mass, weight & modeling assumptions
- Mass (m): A measure of the quantity of matter inside an object, measured in kilograms (kg). Mass remains invariant regardless of gravitational field.
- Weight (W): The gravitational pull exerted by a planet on a mass:
W = mg (on Earth, Cambridge standard is g = 10 m s⁻²)
- Particle Model: Objects (cars, sledges, bricks, crates) are treated as single mass points:
- Rotational effects, tumbling, and aerodynamic shape distribution are omitted.
- All external forces act at a single geometric point.
- Friction & Normal Reaction: On a rough horizontal surface:
- Perpendicular equilibrium: R = mg (reaction balances weight).
- Limiting friction: Fmax = μR = μmg, opposing the direction of impending or actual slipping.
3. Worked examples: Horizontal motion with F = ma
💡 Worked Example 1: Horizontal Sledge with Friction (Collins p108)
A boy pulls his sledge horizontally across snow with a light horizontal rope. The frictional force is 40 N and the sledge is accelerating at 0.3 m s⁻². The sledge has a mass of 18 kg. Find the tension in the rope.
- Model and identify forces: Model sledge as a particle of mass m = 18 kg. Vertically, weight W = 18g = 180 N is balanced by normal reaction R = 180 N. Horizontally, tension T acts forward and friction F = 40 N acts backwards.
- Set up Newton’s second law: In the direction of motion, resultant force Fnet = T − 40 N.
- Substitute into F = ma: T − 40 = 18 × 0.3.
- Calculate product: 18 × 0.3 = 5.4 N.
- Solve for tension T: T = 40 + 5.4 = 45.4 N.
Answer: The tension in the rope is 45.4 N.
💡 Worked Example 2: Decelerating Caravan & Tow Bar Thrust (Collins p109–110)
A car is towing a caravan along a straight horizontal road at 24 m s⁻¹. The car decelerates at a constant rate for 112 m, which takes 8 s. Given that the caravan has a mass of 400 kg and the coefficient of friction between caravan and road is , find the thrust in the tow bar whilst decelerating.
- Find acceleration using SUVAT: u = 24 m s⁻¹, s = 112 m, t = 8 s. Using s = ut + at²:
112 = 24(8) + a(8²) ⟹ 112 = 192 + 32a ⟹ 32a = 112 − 192 = −80 ⟹ a = −2.5 m s⁻². - Resolve vertically on caravan: R = 400g = 400 × 10 = 4000 N.
- Calculate frictional resistance: F = μR = × 4000 = 500 N opposing motion (pointing backwards).
- Formulate horizontal equation of motion: The tow bar exerts a backward compressive force (thrust T) on the caravan. In direction of motion:
Fnet = −T − F = ma ⟹ −T − 500 = 400(−2.5). - Solve for thrust T: −T − 500 = −1000 ⟹ −T = −500 ⟹ T = 500 N.
Answer: The thrust in the tow bar is 500 N.
💡 Worked Example 3: Angled Pull on a Rough Horizontal Surface
A crate of mass 25 kg is pulled across a rough floor by a handle inclined at 20° above horizontal with tension 95 N. The coefficient of friction is μ = 0.25. Calculate the normal reaction, the friction, and the acceleration.
- Resolve vertically (equilibrium): R + 95 sin 20° − 25g = 0 ⟹ R = 250 − 95(0.3420) = 250 − 32.49 = 217.51 N.
- Determine limiting friction: F = μR = 0.25 × 217.51 = 54.38 N.
- Find horizontal resultant force: Driving component = 95 cos 20° = 95(0.9397) = 89.27 N. Net force Fnet = 89.27 − 54.38 = 34.89 N.
- Apply F = ma: 34.89 = 25a ⟹ a = 34.89 / 25 = 1.396 m s⁻².
Answer: Normal reaction is 218 N (3 s.f.) and acceleration is 1.40 m s⁻² (3 s.f.).
🛠️ Interactive Tool: Newton’s Second Law & Dynamics Solver
Enter particle mass, driving force, and friction to compute acceleration and full step-by-step working.
Click "Calculate Dynamics" to display step-by-step solution.
✏️ Try it: Newton’s laws & horizontal motion
-
A car of mass 1200 kg accelerates uniformly along a straight level road from rest to 18 m s⁻¹ in 12 s. Resistance forces total 450 N. Find the driving force exerted by the engine.
Show solution
Step 1: Calculate acceleration: a = (v − u) / t = (18 − 0) / 12 = 1.5 m s⁻².
Step 2: Set up equation of motion: Fnet = D − 450 = ma.
Step 3: Substitute mass and acceleration: D − 450 = 1200 × 1.5 = 1800.
Step 4: Solve for driving force: D = 1800 + 450 = 2250 N (2.25 kN). -
A 40 kg packing case is pulled across a level warehouse floor by a horizontal rope with tension 160 N. The case moves at constant speed. Find the coefficient of friction μ between the case and the floor.
Show solution
Step 1: Constant speed implies equilibrium (a = 0 m s⁻²), so driving force equals friction: F = 160 N.
Step 2: Vertical equilibrium: R = mg = 40 × 10 = 400 N.
Step 3: Use limiting friction formula: F = μR ⟹ 160 = μ(400).
Step 4: Solve for μ: μ = 160 / 400 = 0.4. -
A toy car of mass 0.5 kg at rest is subjected to a constant forward force of 3.2 N against a resistive force of 0.8 N for 4 s. Find its final speed and the distance covered.
Show solution
Step 1: Net force Fnet = 3.2 − 0.8 = 2.4 N.
Step 2: Acceleration a = F / m = 2.4 / 0.5 = 4.8 m s⁻².
Step 3: Velocity after 4 s: v = u + at = 0 + 4.8(4) = 19.2 m s⁻¹.
Step 4: Distance travelled: s = ut + at² = 0 + 0.5(4.8)(16) = 38.4 m.
🎯 Learning objectives
- Analyze vertical linear motion under constant gravitational force W = mg with g = 10 m s⁻².
- Formulate equations of motion incorporating fluid resistance and air drag.
- Model multistage motion when lifting cables snap or driving forces are removed.
- Calculate times of flight, peak altitudes, and impact velocities across multi-stage trajectories.
Book exercises: Exercise 4.2A and Exam-style questions 5, 8.
1. Dynamics of vertical motion
- Weight acts fully along motion: In horizontal motion, weight is perpendicular to travel; in vertical motion, weight contributes directly to the resultant force:
Downward pull: W = mg (where g = 10 m s⁻² on Earth)
- Sign convention & coordinate direction:
- Upward acceleration (+ direction upwards): T − mg = ma ⟹ T = m(g + a). Tension exceeds weight.
- Downward acceleration (+ direction downwards): mg − T = ma ⟹ T = m(g − a). Tension is less than weight.
- Constant velocity (a = 0): T = mg (tension equals weight).
- Air resistance and resistive drag:
- Resistive force always opposes the instantaneous direction of motion.
- For a falling body: mg − Rair = ma ⟹ a = g − .
- For a rising body: weight and drag both act downwards: −mg − Rair = ma ⟹ a = −(g + ).
2. Multi-stage motion: Cable snapping & engine cut-off
- Two Distinct Phases: When a supporting cable snaps or a rocket runs out of fuel:
- Stage 1 (Forced / Accelerated Motion): Net force Fnet = T − mg. Particle accelerates upwards from initial height h₀ to release height h₁, reaching velocity v₁.
- Stage 2 (Free Flight Under Gravity): Tension ceases instantaneously (T = 0 N). Acceleration becomes purely gravitational: a = −g = −10 m s⁻².
- Continuity Conditions: The terminal velocity v₁ and displacement s₁ from Stage 1 serve as the exact initial conditions (u₂ = v₁, h_init = h₁ + s₁) for Stage 2.
- Peak Height (Apex): At the maximum height of Stage 2, vertical velocity momentarily drops to zero (v = 0 m s⁻¹).
3. Worked examples: Vertical motion & cable snap
💡 Worked Example 4: Suitcase Falling with Air Drag (Collins p112)
A suitcase of mass 4 kg is in freefall. It experiences air resistance of 0.2 N as it falls. Find the acceleration of the suitcase.
- Identify vertical forces: Weight acting downwards W = mg = 4 × 10 = 40 N. Air resistance acting upwards Rair = 0.2 N.
- Formulate downward equation of motion: Fnet = mg − Rair = ma.
- Substitute numerical values: 40 − 0.2 = 4a ⟹ 39.8 = 4a.
- Solve for acceleration: a = 39.8 / 4 = 9.95 m s⁻².
Answer: The acceleration of the suitcase is 9.95 m s⁻² downwards.
💡 Worked Example 5: Multistage Ball Lift & Cable Snap (Collins p112–113)
A ball of mass 0.7 kg is raised vertically by a rope. Initially stationary at a height of 0.5 m above ground, the tension in the rope is 10 N. After 1.5 s, the rope snaps. Find how long it takes, after the rope snaps, for the ball to return to the ground.
- Determine Stage 1 acceleration: Upward resultant force F = 10 − 0.7g = 10 − 7 = 3 N.
F = ma ⟹ 3 = 0.7a ⟹ a = = ≈ 4.286 m s⁻². - Calculate velocity and height at moment of snap:
v = u + at = 0 + (4.286)(1.5) = 6.429 m s⁻¹ (upwards).
Distance climbed: s₁ = ut + at² = 0 + 0.5(4.286)(1.5²) = 4.821 m.
Total height above ground: h = 0.5 + 4.821 = 5.321 m. - Set up Stage 2 equation (free flight under gravity):
Initial velocity u₂ = +6.429 m s⁻¹, acceleration a = −10 m s⁻², total displacement to ground s = −5.321 m.
s = ut + at² ⟹ −5.321 = 6.429t − 5t² ⟹ 5t² − 6.429t − 5.321 = 0. - Solve the quadratic equation:
t = = = .
t = = = 1.858 s.
Answer: After the rope snaps, the ball takes 1.86 s (3 s.f.) to return to the ground.
💡 Worked Example 6: Crane Cable Lowering a Load with Deceleration
A crate of mass 80 kg is lowered vertically by a crane. It decelerates uniformly from 5 m s⁻¹ to rest in a distance of 4 m. Calculate the tension in the crane cable during this braking phase.
- Determine vertical acceleration: Motion is downwards. u = 5 m s⁻¹, v = 0 m s⁻¹, s = 4 m.
Using v² = u² + 2as ⟹ 0 = 5² + 2a(4) ⟹ 8a = −25 ⟹ a = −3.125 m s⁻² (net acceleration directed upwards). - Formulate upward equation of motion: Taking upwards as positive:
T − mg = ma ⟹ T − 80(10) = 80(3.125). - Compute terms: T − 800 = 250 N.
- Solve for cable tension T: T = 800 + 250 = 1050 N (1.05 kN).
Answer: The tension in the crane cable is 1050 N.
✏️ Try it: Vertical motion
-
A stone of mass 250 g is released from rest at the top of a 45 m cliff. Air resistance is constant at 0.1 N. Find the time taken to strike the sea below.
Show solution
Step 1: Downward weight W = 0.25 × 10 = 2.5 N.
Step 2: Net force F = 2.5 − 0.1 = 2.4 N.
Step 3: Acceleration a = 2.4 / 0.25 = 9.6 m s⁻².
Step 4: Time: s = at² ⟹ 45 = 0.5(9.6)t² ⟹ 4.8t² = 45 ⟹ t² = 9.375 ⟹ t = 3.06 s (3 s.f.). -
A model rocket of mass 1.5 kg is propelled vertically upwards by an engine thrust of 36 N for 3 s before burnout. Find the maximum height reached above the launch pad.
Show solution
Step 1: Stage 1 acceleration: T − mg = ma ⟹ 36 − 15 = 1.5a ⟹ 21 = 1.5a ⟹ a = 14 m s⁻².
Step 2: At burnout (t = 3 s): v₁ = 14(3) = 42 m s⁻¹; s₁ = 0.5(14)(9) = 63 m.
Step 3: Stage 2 under gravity: v² = u² − 2gs₂ ⟹ 0 = 42² − 20s₂ ⟹ 20s₂ = 1764 ⟹ s₂ = 88.2 m.
Step 4: Total peak height = 63 + 88.2 = 151.2 m. -
A winch cable pulls a 60 kg container vertically upwards with tension 720 N. If the cable snaps when the container has reached a speed of 6 m s⁻¹, find the maximum height the container climbs after the snap.
Show solution
Step 1: After cable snaps, acceleration is purely gravitational: a = −g = −10 m s⁻².
Step 2: At highest point, v = 0 m s⁻¹.
Step 3: Using v² = u² + 2as: 0 = 6² + 2(−10)s ⟹ 20s = 36 ⟹ s = 1.8 m.
Step 4: The container climbs a further 1.8 m.
🎯 Learning objectives
- Resolve forces parallel and perpendicular to an inclined plane inclined at angle θ to the horizontal.
- Calculate normal reaction force R = mg cos θ and limiting friction F = μR.
- Formulate equations of motion along the plane for sliding up, sliding down, and limiting equilibrium.
- Resolve external horizontal and angled forces onto inclined coordinate axes using exact trigonometric fractions.
Book exercises: Exercise 4.3A and Exam-style questions 2, 7, 14, 16, 17, 19.
1. Inclined plane geometry & force resolution
- Coordinate Transformation: Always align axes with the slope:
- Parallel Axis (x): along the line of greatest slope (direction of actual or impending acceleration).
- Perpendicular Axis (y): normal to the surface (where net acceleration ay = 0 m s⁻²).
- Resolving Weight W = mg:
- Perpendicular component: W⊥ = mg cos θ (directed into the plane).
- Parallel component: W∥ = mg sin θ (directed straight down the plane).
- Normal Reaction & Limiting Friction:
- Perpendicular equilibrium: R = mg cos θ (in the absence of external perpendicular forces).
- Limiting friction on rough slope: Fmax = μR = μmg cos θ.
- Angle of Repose (Limiting Equilibrium):
A particle rests on a rough slope on the verge of sliding down under gravity alone when down-slope pull equals friction:
mg sin θ = μmg cos θ ⟹ μ = tan θ.
2. Horizontal forces & exact trigonometric ratios
- Horizontal Force P on an Inclined Plane: When a force P pushes horizontally:
- Parallel component pushing up slope: P cos θ.
- Perpendicular component pressing into slope: P sin θ.
- Normal reaction increases: R = mg cos θ + P sin θ.
- Friction changes accordingly: F = μ(mg cos θ + P sin θ).
- Exact Trigonometric Fractions: In Cambridge mechanics, angles are frequently defined by exact ratios such as sin θ = or cos θ = :
- Construct a reference right triangle using Pythagoras: a² + b² = c².
- For sin θ = : adjacent = √(25² − 7²) = √576 = 24 ⟹ cos θ = , tan θ = .
- For cos θ = : opposite = √(17² − 8²) = √225 = 15 ⟹ sin θ = , tan θ = .
- Never convert to decimal angles; maintain exact fractions to prevent rounding errors!
3. Worked examples: Inclined planes
💡 Worked Example 7: Limiting Equilibrium & Released Slide (Collins p115–116)
A horizontal force of 2 N is just sufficient to prevent a block of mass 1 kg from sliding down a rough plane inclined at sin θ = to the horizontal.
(a) Find the value of the coefficient of friction μ.
(b) The horizontal force is removed. Find the acceleration with which the block now moves down the plane.
- Find trigonometric values: Given sin θ = , adjacent side = √(25² − 7²) = 24 ⟹ cos θ = .
- Resolve parallel to the slope (preventing downward slip):
Friction F acts up the slope. The 2 N horizontal force has component 2 cos θ up the slope.
F + 2 cos θ − mg sin θ = 0 ⟹ F = (1 × 10)() − 2() = = = 0.88 N. - Resolve perpendicular to the slope:
The 2 N horizontal force also presses into the slope with component 2 sin θ.
R − mg cos θ − 2 sin θ = 0 ⟹ R = 10() + 2() = = = 10.16 N. - Compute coefficient of friction μ:
μ = = = ≈ 0.0866. - Part b — remove horizontal force:
New normal reaction: R′ = mg cos θ = 10() = = 9.6 N.
New friction: F′ = μR′ = ()(9.6) = ≈ 0.8315 N. - Apply Newton’s second law down the slope:
mg sin θ − F′ = ma ⟹ 10() − 0.8315 = 1 × a ⟹ 2.80 − 0.8315 = a ⟹ a = 1.97 m s⁻².
Answer: (a) μ = 0.0866 (3 s.f.); (b) acceleration is 1.97 m s⁻² down the plane.
💡 Worked Example 8: Parallel Restraining Force & Rolling Time (Collins p117–118)
A particle of mass 5 kg is just prevented from slipping down a slope by a 3 N force acting parallel to the slope. The slope is inclined at 20° to the horizontal. Find:
(a) the coefficient of friction μ
(b) the acceleration when the 3 N force is removed
(c) how long it takes the particle to roll 10 m.
- Resolve parallel to slope in limiting equilibrium:
F + 3 − 5g sin 20° = 0 ⟹ F = 50 sin 20° − 3 = 17.101 − 3 = 14.101 N. - Resolve perpendicular to slope:
R − 5g cos 20° = 0 ⟹ R = 50 cos 20° = 46.985 N. - Calculate coefficient of friction:
μ = = = 0.300. - Determine acceleration when 3 N force removed:
Reaction R is unchanged because the 3 N force was parallel to slope. Hence F = μR = 14.101 N.
Down-slope equation: 5g sin 20° − F = 5a ⟹ 17.101 − 14.101 = 5a ⟹ 3.00 = 5a ⟹ a = 0.600 m s⁻². - Calculate time to travel 10 m from rest:
s = ut + at² ⟹ 10 = 0 + (0.600)t² ⟹ 0.3t² = 10 ⟹ t² = = 33.33 ⟹ t = 5.77 s.
Answer: (a) μ = 0.300; (b) acceleration = 0.600 m s⁻²; (c) time = 5.77 s.
💡 Worked Example 9: Projection Up a Rough Inclined Plane
A block of mass 4 kg is projected up a rough plane inclined at 30° to the horizontal with initial speed 12 m s⁻¹. The coefficient of friction is μ = . Find the distance travelled up the plane before the block comes to instantaneous rest.
- Resolve perpendicular to the plane: R = mg cos 30° = 40 × = 20√3 N.
- Find limiting friction: Since motion is upwards, friction acts downwards along the slope:
F = μR = ()(20√3) = 5 N. - Determine resultant retarding force down the slope:
Component of weight down slope = mg sin 30° = 40 × 0.5 = 20 N.
Total force down slope = 20 + 5 = 25 N. - Calculate deceleration: By Newton’s second law: −25 = 4a ⟹ a = −6.25 m s⁻².
- Use SUVAT to find distance to rest (v = 0 m s⁻¹):
v² = u² + 2as ⟹ 0 = 12² + 2(−6.25)s ⟹ 12.5s = 144 ⟹ s = 11.52 m.
Answer: The block travels 11.5 m (3 s.f.) up the plane before coming to instantaneous rest.
✏️ Try it: Motion on inclined planes
-
A skier of mass 70 kg slides down a smooth slope inclined at 25° to the horizontal. Calculate the acceleration of the skier.
Show solution
Step 1: On a smooth slope, friction F = 0 N.
Step 2: Down-slope equation: mg sin θ = ma ⟹ a = g sin 25°.
Step 3: Compute acceleration: a = 10 sin 25° = 10(0.4226) = 4.23 m s⁻². -
A parcel of mass 8 kg rests in limiting equilibrium on a rough plane inclined at angle α where tan α = 0.75. Find the normal reaction and the coefficient of friction μ.
Show solution
Step 1: tan α = 3/4 ⟹ 3-4-5 triangle: sin α = 3/5 = 0.6, cos α = 4/5 = 0.8.
Step 2: Normal reaction: R = mg cos α = 8(10)(0.8) = 64 N.
Step 3: In limiting equilibrium, μ = tan α = 0.75. -
A 2 kg block slides down a rough plane inclined at 30° with acceleration 1.5 m s⁻². Find the coefficient of friction μ between the block and the plane.
Show solution
Step 1: Normal reaction: R = mg cos 30° = 20(0.8660) = 17.32 N.
Step 2: Downward equation: mg sin 30° − F = ma ⟹ 20(0.5) − F = 2(1.5) ⟹ 10 − F = 3 ⟹ F = 7 N.
Step 3: Solve for μ: μ = F / R = 7 / 17.32 = 0.404 (3 s.f.).
🎯 Learning objectives
- Solve problems involving two or more connected particles moving in a straight line.
- Distinguish between internal coupling forces (which cancel across the whole system) and external forces.
- Differentiate between tension in light strings and tension/thrust in rigid tow-bars.
- Model passenger apparent weight and floor reactions inside accelerating and decelerating lifts.
Book exercises: Exercise 4.4A, Exercise 4.4B, and Exam-style questions 6, 7, 9, 10, 11.
1. Systems of connected particles & tow-bars
- Coupled Motion Principle: When two objects are connected by a light inextensible coupling:
- Both particles move with identical speed and acceleration magnitude: a₁ = a₂ = a.
- Tension forces acting at the two ends of the connector are equal in magnitude and point towards each other.
- Two Analytical Approaches:
- Whole-System Approach: Add the equations of motion for both bodies. Internal coupling tensions cancel out completely:
Fnet, external = (m₁ + m₂)a
- Individual Isolation Approach: Apply F = ma to each separate body to find the internal coupling force (tension T or thrust).
- Whole-System Approach: Add the equations of motion for both bodies. Internal coupling tensions cancel out completely:
- Tension vs Thrust in Couplings:
- Light String / Cable: Can only be in tension (T > 0). If pushed together, the string goes slack and T = 0 N.
- Rigid Rod / Tow-bar: Can transmit both tension (pulling during acceleration) and thrust (compression during braking or deceleration).
2. Lifts & apparent weight
- Passenger and Floor Reaction (Apparent Weight): A person of mass m stands on a scale inside a lift of mass M:
- The scale reading is the normal reaction R exerted by the floor on the passenger's feet.
- Accelerating Upwards (a > 0): R − mg = ma ⟹ R = m(g + a) > mg. The passenger feels heavier.
- Accelerating Downwards / Decelerating Upwards: mg − R = ma ⟹ R = m(g − a) < mg. The passenger feels lighter.
- Freefall (Cable snaps, a = g downwards): R = m(g − g) = 0 N. Apparent weightlessness!
- Whole Lift System (Cable Tension): The hoist cable supports both the lift cabin and its occupants:
- Total mass = M + m.
- Upward acceleration: T − (M + m)g = (M + m)a ⟹ T = (M + m)(g + a).
- Downward acceleration: (M + m)g − T = (M + m)a ⟹ T = (M + m)(g − a).
3. Worked examples: Connected vehicles & lifts
💡 Worked Example 10: Car Towing Trailer (Collins p121–122)
A car of mass 700 kg tows a trailer of mass 200 kg along a straight horizontal road. The engine exerts a driving force of 1220 N. The car experiences a resistance of 200 N whilst the trailer experiences 300 N. Find the acceleration and the tension in the tow bar.
- Formulate whole-system equation: Total mass mtot = 700 + 200 = 900 kg.
Total driving force = 1220 N. Total resistance = 200 + 300 = 500 N.
Fnet = 1220 − 500 = 720 N. - Calculate system acceleration: Fnet = mtot a ⟹ 720 = 900a ⟹ a = = 0.8 m s⁻².
- Isolate the trailer: Horizontal forces on trailer are tension T pulling forward and resistance 300 N backwards:
T − 300 = mt a ⟹ T − 300 = 200 × 0.8 = 160. - Solve for tension T: T = 300 + 160 = 460 N.
- Check on car: 1220 − T − 200 = 700(0.8) ⟹ 1020 − 460 = 560 N; 700 × 0.8 = 560 N (verified).
Answer: Acceleration is 0.8 m s⁻² and tow bar tension is 460 N.
💡 Worked Example 11: Two Connected Bricks & Cable Snapping (Collins p122–124)
Two bricks, A and B, of masses 3 kg and 2 kg, are connected by a light vertical cable with A above B. A vertical force of 67 N is applied upwards to A. When B is 3 m above ground (having risen 2 m from rest), the cable breaks. Show that B travels a further 0.68 m before coming to instantaneous rest.
- Determine Stage 1 acceleration: Total mass = 3 + 2 = 5 kg. Total weight = 5g = 50 N.
Upward net force: Fnet = 67 − 50 = 17 N.
By F = ma: 17 = 5a ⟹ a = 3.4 m s⁻². - Find velocity when the cable snaps: Having ascended s = 2 m from rest:
v² = u² + 2as = 0 + 2(3.4)(2) = 13.6 ⟹ v = √13.6 m s⁻¹. - Set up Stage 2 equation for brick B: Tension is now zero; B moves freely under gravity with downward acceleration a = −g = −10 m s⁻². At maximum height, v = 0 m s⁻¹.
v² = u² + 2as ⟹ 0 = (√13.6)² + 2(−10)s ⟹ 0 = 13.6 − 20s. - Solve for further displacement s:
20s = 13.6 ⟹ s = = 0.68 m.
Answer: Brick B travels a further 0.68 m upwards before coming to instantaneous rest.
💡 Worked Example 12: Woman in an Accelerating Lift (Collins p132)
A woman of mass 80 kg stands in a lift of mass 400 kg pulled upwards by a cable. The reaction force R exerted on the woman by the lift floor is 920 N. Find the acceleration of the lift and the tension in the cable.
- Isolate the woman: Vertically, upward reaction R = 920 N and downward weight W = 80g = 800 N.
Equation of motion: R − mg = ma ⟹ 920 − 800 = 80a ⟹ 120 = 80a. - Solve for acceleration a: a = = 1.5 m s⁻² (upwards).
- Consider the lift system as a whole: Total mass = 400 + 80 = 480 kg. Total weight = 480g = 4800 N.
Equation for lift cable: T − 480g = 480a. - Substitute acceleration into cable equation:
T − 4800 = 480(1.5) = 720 ⟹ T = 4800 + 720 = 5520 N (5.52 kN).
Answer: The acceleration is 1.5 m s⁻² and cable tension is 5520 N.
✏️ Try it: Connected particles & lifts
-
A car of mass 1000 kg tows a caravan of mass 600 kg. The car engine produces 2400 N driving force. Total resistances are 300 N on the car and 500 N on the caravan. Find the acceleration and the tension in the tow-bar.
Show solution
Step 1: System equation: 2400 − (300 + 500) = (1000 + 600)a ⟹ 1600 = 1600a ⟹ a = 1.0 m s⁻².
Step 2: Trailer equation: T − 500 = 600(1.0) ⟹ T = 500 + 600 = 1100 N (1.1 kN). -
A man of mass 75 kg stands on bathroom scales in a lift descending at 2 m s⁻². What reading in Newtons do the scales show?
Show solution
Step 1: Downward acceleration implies weight exceeds floor reaction: mg − R = ma.
Step 2: Substitute values: 75(10) − R = 75(2) ⟹ 750 − R = 150.
Step 3: Solve for R: R = 750 − 150 = 600 N. -
Two blocks P (4 kg) and Q (6 kg) on a smooth horizontal table are connected by a light string. Block Q is pulled by a horizontal force of 30 N. Find the acceleration and the tension in the connecting string.
Show solution
Step 1: System acceleration: a = F / (m_P + m_Q) = 30 / (4 + 6) = 3.0 m s⁻².
Step 2: Isolate rear block P: T = m_P a = 4 × 3.0 = 12 N.
🎯 Learning objectives
- Formulate equations of motion for particles connected by light inextensible strings passing over smooth fixed pulleys.
- Apply the Atwood machine formulas to calculate vertical acceleration and string tension.
- Solve table-pulley and inclined-plane pulley configurations with friction.
- Analyze multi-stage dynamics when hanging masses strike the ground and strings go slack.
- Calculate the resultant force exerted by the string on the pulley wheel.
Book exercises: Exercise 4.5A and Exam-style questions 3, 4, 12, 13, 16, 17, 18.
1. The three classic pulley systems
- Standard Modeling Assumptions:
- Smooth Pulley: Zero friction on the axle/rim ⟹ tension T is uniform on both sides of the pulley.
- Light Pulley: Zero mass/rotational inertia ⟹ requires no torque to turn.
- Light Inextensible String: Zero mass ⟹ constant tension throughout; does not stretch ⟹ acceleration magnitudes a and speeds v are identical for both particles.
- System A: Vertical Atwood Machine (Two hanging masses m₁ > m₂):
- For m₁ (moving downwards): m₁g − T = m₁a.
- For m₂ (moving upwards): T − m₂g = m₂a.
- Adding equations: a = .
- String tension: T = .
- Force on pulley: Fpulley = 2T vertically downwards.
- System B: Horizontal Table with Pulley at Edge:
- Mass m₁ on rough table (friction F = μm₁g), mass m₂ hanging vertically.
- For m₁: T − μm₁g = m₁a; for m₂: m₂g − T = m₂a.
- Adding equations: a = .
- Resultant force on pulley: two perpendicular tensions of magnitude T at 90°:
Fpulley = √(T² + T²) = T√2 at 45° below horizontal.
2. Multi-stage motion when hanging mass lands
- Stage 1 (Coupled Acceleration): Both particles accelerate together with acceleration a until the hanging mass strikes the floor after dropping distance h.
- Impact Velocity: Using v² = u² + 2as with u = 0 m s⁻¹:
v₁ = √(2ah)
- Stage 2 (String Goes Slack): When the hanging mass strikes the floor without rebounding, tension vanishes (T = 0 N):
- The particle on the table or slope continues moving with initial velocity u₂ = v₁.
- It decelerates due to friction (and gravity if on a slope): −F = m₁a₂ ⟹ a₂ = −μg.
- Distance travelled to rest: s₂ = .
- Total distance travelled by particle 1 before coming to rest: stotal = h + s₂.
3. Worked examples: Pulley dynamics
💡 Worked Example 14: Atwood Machine Masses (Collins p135–136)
Two particles, A and B, of masses 11 kg and 3 kg, are connected to either end of a light inextensible string passing over a smooth fixed pulley. Initially at rest, find the tension in the string and the acceleration of the two particles when released. (Take g = 10 m s⁻²).
- Formulate equation for heavier particle A (descending):
11g − T = 11a ⟹ 110 − T = 11a. - Formulate equation for lighter particle B (ascending):
T − 3g = 3a ⟹ T − 30 = 3a. - Add equations to eliminate T:
(110 − T) + (T − 30) = 11a + 3a ⟹ 80 = 14a. - Solve for acceleration a:
a = = ≈ 5.71 m s⁻². - Substitute a to find tension T:
T = 30 + 3() = 30 + = ≈ 47.1 N.
Answer: Acceleration is m s⁻² (5.71 m s⁻²) and string tension is N (47.1 N).
💡 Worked Example 15: Table Pulley & Slack String (Collins p136–138)
Particle C of mass 4 kg is on a table 1.5 m from a smooth edge pulley. Particle D of mass 5 kg is suspended 0.6 m above the floor. C experiences a resistive force of 23 N as it moves across the table. Released from rest with string taut, D hits the floor and remains at rest. Find the distance of C from the pulley when C comes to rest.
- Stage 1 equations of motion:
For hanging particle D (downwards): 5g − T = 5a ⟹ 50 − T = 5a.
For table particle C (horizontally): T − 23 = 4a. - Add equations to find acceleration:
(50 − T) + (T − 23) = 9a ⟹ 27 = 9a ⟹ a = 3 m s⁻². - Calculate speed when D hits the ground:
D falls s₁ = 0.6 m from rest: v² = u² + 2as = 0 + 2(3)(0.6) = 3.6 ⟹ v = √3.6 ≈ 1.897 m s⁻¹. - Stage 2 (string goes slack):
Tension drops to zero (T = 0 N). The only horizontal force on C is the 23 N resistance:
−23 = 4a₂ ⟹ a₂ = −5.75 m s⁻². - Calculate further distance s₂ travelled by C until rest:
v² = u² + 2a₂s₂ ⟹ 0 = 3.6 + 2(−5.75)s₂ ⟹ 11.5s₂ = 3.6 ⟹ s₂ = ≈ 0.313 m. - Calculate final distance from pulley:
Total distance travelled by C = s₁ + s₂ = 0.6 + 0.313 = 0.913 m.
Distance from pulley = 1.5 − 0.913 = 0.587 m.
Answer: Particle C comes to rest 0.587 m from the pulley.
💡 Worked Example 16: Pulley on Inclined Plane with Landing (Collins p139–142)
Particle A of mass 2 kg lies on a rough plane inclined at cos θ = with μ = . Connected by a light string over a smooth apex pulley to hanging mass B of mass 3 kg hanging 2 m above the ground. System released from rest. Find initial acceleration, tension, and total distance travelled by A before rest assuming B does not bounce.
- Trigonometry & forces on A: cos θ = 8/17 ⟹ sin θ = 15/17.
Normal reaction: R = 2g cos θ = 20 × (8/17) = 160/17 N.
Friction: F = μR = (1/4)(160/17) = 40/17 N.
Weight component down slope: 2g sin θ = 20 × (15/17) = 300/17 N. - Stage 1 equations of motion:
For hanging mass B (downwards): 3g − T = 3a ⟹ 30 − T = 3a.
For slope mass A (up slope): T − 2g sin θ − F = 2a ⟹ T − − = 2a ⟹ T − 20 = 2a. - Add equations to find acceleration and tension:
(30 − T) + (T − 20) = 5a ⟹ 10 = 5a ⟹ a = 2 m s⁻².
Tension: T = 30 − 3(2) = 24 N. - Velocity when B hits the ground (s₁ = 2 m):
v² = 0 + 2(2)(2) = 8 ⟹ v = √8 m s⁻¹. - Stage 2 (B on ground, string slack):
Forces on A acting down slope: weight component (300/17 N) and friction (40/17 N):
−2g sin θ − F = 2a₂ ⟹ − = −20 = 2a₂ ⟹ a₂ = −10 m s⁻². - Calculate further distance s₂:
0 = (√8)² + 2(−10)s₂ ⟹ 20s₂ = 8 ⟹ s₂ = 0.4 m.
Total distance travelled by A = 2 + 0.4 = 2.4 m.
Answer: Acceleration is 2 m s⁻², tension is 24 N, and total distance is 2.4 m.
🔬 Interactive Simulation: Connected Particles & Pulley Apparatus
Select configuration, adjust masses and friction, then run the simulation to see live dynamics, string tension, and post-break motion with step-by-step numbers.
Live Analytical Steps (g = 10 m s⁻²):
✏️ Try it: Pulley systems
-
Two masses 6 kg and 4 kg hang vertically over a smooth fixed pulley. Released from rest, find the acceleration of each mass and the tension in the string.
Show solution
Step 1: Downward pull on 6 kg: 6g − T = 6a.
Step 2: Upward pull on 4 kg: T − 4g = 4a.
Step 3: Add equations: 2g = 10a ⟹ 20 = 10a ⟹ a = 2.0 m s⁻².
Step 4: Tension: T = 40 + 4(2) = 48 N. -
A 5 kg block sits on a smooth horizontal table connected over an edge pulley to a hanging mass of 3 kg. Find the acceleration and the force on the pulley.
Show solution
Step 1: For table block: T = 5a; for hanging mass: 3g − T = 3a.
Step 2: Add equations: 30 = 8a ⟹ a = 30 / 8 = 3.75 m s⁻².
Step 3: Tension T = 5 × 3.75 = 18.75 N.
Step 4: Force on pulley: F = T√2 = 18.75 × 1.414 = 26.5 N at 45°. -
In an Atwood machine, the tension is 36 N and the acceleration is 2 m s⁻². Find the masses m₁ and m₂.
Show solution
Step 1: For descending mass m₁: m₁g − T = m₁a ⟹ 10m₁ − 36 = 2m₁ ⟹ 8m₁ = 36 ⟹ m₁ = 4.5 kg.
Step 2: For ascending mass m₂: T − m₂g = m₂a ⟹ 36 − 10m₂ = 2m₂ ⟹ 12m₂ = 36 ⟹ m₂ = 3.0 kg.
📋 Chapter 4 Summary: Key Principles of Newton’s Laws
- Newton’s 1st Law (Inertia): When resultant force ΣF = 0, acceleration a = 0. The body remains stationary or moves at constant velocity.
- Newton’s 2nd Law (Dynamics): Fnet = ma. Acceleration is proportional to resultant force and in the same direction.
- Newton’s 3rd Law (Action-Reaction): Equal and opposite forces between interacting bodies.
- Weight vs Mass: W = mg in Newtons (N), where mass m is in kg and g = 10 m s⁻² on Earth.
- Friction & Inclines: Normal reaction R = mg cos θ; limiting friction Fmax = μR = μmg cos θ. Motion down: a = g(sin θ − μ cos θ). Limiting equilibrium: μ = tan θ.
- Connected Particles & Tow-bars: Across the entire system, internal tensions/thrusts cancel: Fnet, external = (m₁ + m₂)a. Rigid tow-bars transmit both tension (pulling) and thrust (compression).
- Lifts & Apparent Weight: Upward acceleration: R = m(g + a) > mg. Downward acceleration: R = m(g − a) < mg. Cable tension: T = (M + m)(g ± a).
- Pulleys & Atwood Machine: Acceleration a = ; tension T = . Resultant force on pulley: 2T downwards (vertical) or T√2 at 45° (table edge).
- Multi-stage dynamics: When cables snap or hanging masses land, tension vanishes (T = 0 N) and particles move under gravity and/or friction alone.
Key formulas reference sheet
| Physical Scenario | Equation of Motion | Key Quantities / Formulas |
|---|---|---|
| Horizontal motion | D − F = ma | R = mg; Fmax = μR = μmg |
| Vertical freefall with drag | mg − Rair = ma | a = g − (Rair / m) |
| Rough inclined plane | mg sin θ − μR = ma | R = mg cos θ; a = g(sin θ − μ cos θ) |
| Person in an accelerating lift | R − mg = ma (upward) | R = m(g + a); Cable T = (M + m)(g + a) |
| Car and trailer system | D − (Xc + Xt) = (mc + mt)a | Tow-bar tension T = mta + Xt |
| Vertical Atwood machine | (m₁ − m₂)g = (m₁ + m₂)a | T = 2m₁m₂g / (m₁ + m₂); Fpulley = 2T |
| Table pulley system | m₂g − μm₁g = (m₁ + m₂)a | Fpulley = T√2 at 45° to horizontal |
📄 Printable Chapter Assignment
Download the complete chapter assignment featuring 92 questions from Exercises 4.1A, 4.2A, 4.3A, 4.4A, 4.4B, 4.5A, end-of-chapter Exam-style questions, and self-check questions formatted with answer spaces for homework or exam preparation.
Chapter 4 Practice Quiz
Test your conceptual understanding and numerical precision across Newton’s laws, inclined planes, lifts, and connected pulley systems.
Based on Cambridge International AS & A Level Mathematics: Mechanics Student’s Book by Tom Andrews and Michael Kent (Collins).